__construct (Constructor) [line 314]
Testing_Selenium __construct(
string
$browser, string
$browserUrl, [string
$host = 'localhost'], [int
$port = 4444], [int
$timeout = 30000])
|
|
Constructor
Parameters:
addLocationStrategy [line 2238]
void addLocationStrategy(
string
$strategyName, string
$functionDefinition)
|
|
Defines a new function for Selenium to locate elements on the page.
For example, if you define the strategy "foo", and someone runs click("foo=blah"), we'll run your function, passing you the string "blah", and click on the element that your function returns, or throw an "Element not found" error if your function returns null.
We'll pass three arguments to your function:
- locator: the string the user passed in
- inWindow: the currently selected window
- inDocument: the currently selected document
The function must return null if the element can't be found.
Parameters:
addSelection [line 867]
void addSelection(
string
$locator, string
$optionLocator)
|
|
Add a selection to the set of selected options in a multi-select element using an option locator.
Parameters:
allowNativeXpath [line 2003]
void allowNativeXpath(
string
$allow)
|
|
Specifies whether Selenium should use the native in-browser implementation of XPath (if any native version is available); if you pass "false" to this function, we will always use our pure-JavaScript xpath library.
Using the pure-JS xpath library can improve the consistency of xpath element locators between different browser vendors, but the pure-JS version is much slower than the native implementations.
Parameters:
altKeyDown [line 518]
Press the alt key and hold it down until doAltUp() is called or a new page is loaded.
altKeyUp [line 529]
answerOnNextPrompt [line 1119]
void answerOnNextPrompt(
string
$answer)
|
|
Instructs Selenium to return the specified answer string in response to the next JavaScript prompt [window.prompt()].
Parameters:
assignId [line 1986]
void assignId(
string
$locator, string
$identifier)
|
|
Temporarily sets the "id" attribute of the specified element, so you can locate it in the future using its ID rather than a slow/complicated XPath. This ID will disappear once the page is reloaded.
Parameters:
attachFile [line 2264]
void attachFile(
string
$fieldLocator, string
$fileLocator)
|
|
Sets a file input (upload) field to the file listed in fileLocator
Parameters:
captureScreenshot [line 2276]
void captureScreenshot(
string
$filename)
|
|
Captures a PNG screenshot to the specified file.
Parameters:
check [line 765]
void check(
string
$locator)
|
|
Check a toggle-button (checkbox/radio)
Parameters:
chooseCancelOnNextConfirmation [line 1088]
void chooseCancelOnNextConfirmation(
)
|
|
By default, Selenium's overridden window.confirm() function will
return true, as if the user had manually clicked OK; after running this command, the next call to confirm() will return false, as if the user had clicked Cancel. Selenium will then resume using the default behavior for future confirmations, automatically returning true (OK) unless/until you explicitly call this command for each confirmation.
chooseOkOnNextConfirmation [line 1106]
void chooseOkOnNextConfirmation(
)
|
|
Undo the effect of calling chooseCancelOnNextConfirmation. Note
that Selenium's overridden window.confirm() function will normally automatically return true, as if the user had manually clicked OK, so you shouldn't need to use this command unless for some reason you need to change your mind prior to the next confirmation. After any confirmation, Selenium will resume using the default behavior for future confirmations, automatically returning true (OK) unless/until you explicitly call chooseCancelOnNextConfirmation for each confirmation.
click [line 355]
void click(
string
$locator)
|
|
Clicks on a link, button, checkbox or radio button. If the click action causes a new page to load (like a link usually does), call waitForPageToLoad.
Parameters:
clickAt [line 396]
void clickAt(
string
$locator, string
$coordString)
|
|
Clicks on a link, button, checkbox or radio button. If the click action causes a new page to load (like a link usually does), call waitForPageToLoad.
Parameters:
close [line 1153]
Simulates the user clicking the "close" button in the titlebar of a popup window or tab.
contextMenu [line 381]
void contextMenu(
string
$locator)
|
|
Simulates opening the context menu for the specified element (as might happen if the user "right-clicked" on the element).
Parameters:
contextMenuAt [line 424]
void contextMenuAt(
string
$locator, string
$coordString)
|
|
Simulates opening the context menu for the specified element (as might happen if the user "right-clicked" on the element).
Parameters:
controlKeyDown [line 540]
Press the control key and hold it down until doControlUp() is called or a new page is loaded.
controlKeyUp [line 551]
createCookie [line 2136]
void createCookie(
string
$nameValuePair, string
$optionsString)
|
|
Create a new cookie whose path and domain are same with those of current page under test, unless you specified a path for this cookie explicitly.
Parameters:
deleteAllVisibleCookies [line 2171]
void deleteAllVisibleCookies(
)
|
|
Calls deleteCookie with recurse=true on all cookies visible to the current page.
As noted on the documentation for deleteCookie, recurse=true can be much slower than simply deleting the cookies using a known domain/path.
deleteCookie [line 2158]
void deleteCookie(
string
$name, string
$optionsString)
|
|
Delete a named cookie with specified path and domain. Be careful; to delete a cookie, you need to delete it using the exact same path and domain that were used to create the cookie.
If the path is wrong, or the domain is wrong, the cookie simply won't be deleted. Also note that specifying a domain that isn't a subset of the current domain will usually fail.
Since there's no way to discover at runtime the original path and domain of a given cookie, we've added an option called 'recurse' to try all sub-domains of the current domain with all paths that are a subset of the current path. Beware; this option can be slow. In big-O notation, it operates in O(n*m) time, where n is the number of dots in the domain name and m is the number of slashes in the path.
Parameters:
doCommand [line 2344]
void doCommand(
$verb, [
$args = array()])
|
|
Parameters:
doubleClick [line 369]
void doubleClick(
string
$locator)
|
|
Double clicks on a link, button, checkbox or radio button. If the double click action causes a new page to load (like a link usually does), call waitForPageToLoad.
Parameters:
doubleClickAt [line 411]
void doubleClickAt(
string
$locator, string
$coordString)
|
|
Doubleclicks on a link, button, checkbox or radio button. If the action causes a new page to load (like a link usually does), call waitForPageToLoad.
Parameters:
dragAndDrop [line 1741]
void dragAndDrop(
string
$locator, string
$movementsString)
|
|
Drags an element a certain distance and then drops it
Parameters:
dragAndDropToObject [line 1754]
void dragAndDropToObject(
string
$locatorOfObjectToBeDragged, string
$locatorOfDragDestinationObject)
|
|
Drags an element and drops it on another element
Parameters:
dragdrop [line 1696]
void dragdrop(
string
$locator, string
$movementsString)
|
|
deprecated - use dragAndDrop instead
Parameters:
fireEvent [line 438]
void fireEvent(
string
$locator, string
$eventName)
|
|
Explicitly simulate an event, to trigger the corresponding "on
event" handler.
Parameters:
focus [line 450]
void focus(
string
$locator)
|
|
Move the focus to the specified element; for example, if the element is an input field, move the cursor to that field.
Parameters:
getAlert [line 1232]
Retrieves the message of a JavaScript alert generated during the previous action, or fail if there were no alerts.
Getting an alert has the same effect as manually clicking OK. If an alert is generated but you do not get/verify it, the next Selenium action will fail.
NOTE: under Selenium, JavaScript alerts will NOT pop up a visible alert dialog.
NOTE: Selenium does NOT support JavaScript alerts that are generated in a page's onload() event handler. In this case a visible dialog WILL be generated and Selenium will hang until someone manually clicks OK.
getAllButtons [line 1638]
Returns the IDs of all buttons on the page.
If a given button has no ID, it will appear as "" in this array.
getAllFields [line 1670]
Returns the IDs of all input fields on the page.
If a given field has no ID, it will appear as "" in this array.
getAllLinks [line 1654]
Returns the IDs of all links on the page.
If a given link has no ID, it will appear as "" in this array.
getAllWindowIds [line 1788]
Returns the IDs of all windows that the browser knows about.
getAllWindowNames [line 1800]
array getAllWindowNames(
)
|
|
Returns the names of all windows that the browser knows about.
getAllWindowTitles [line 1812]
array getAllWindowTitles(
)
|
|
Returns the titles of all windows that the browser knows about.
getAttribute [line 1565]
string getAttribute(
string
$attributeLocator)
|
|
Gets the value of an element attribute.
Parameters:
getAttributeFromAllWindows [line 1683]
array getAttributeFromAllWindows(
string
$attributeName)
|
|
Returns every instance of some attribute from all known windows.
Parameters:
getBodyText [line 1328]
Gets the entire text of the page.
getConfirmation [line 1266]
string getConfirmation(
)
|
|
Retrieves the message of a JavaScript confirmation dialog generated during the previous action.
By default, the confirm function will return true, having the same effect as manually clicking OK. This can be changed by prior execution of the chooseCancelOnNextConfirmation command. If an confirmation is generated but you do not get/verify it, the next Selenium action will fail.
NOTE: under Selenium, JavaScript confirmations will NOT pop up a visible dialog.
NOTE: Selenium does NOT support JavaScript confirmations that are generated in a page's onload() event handler. In this case a visible dialog WILL be generated and Selenium will hang until you manually click OK.
getCookie [line 2096]
Return all cookies of the current page under test.
getCookieByName [line 2109]
string getCookieByName(
string
$name)
|
|
Returns the value of the cookie with the specified name, or throws an error if the cookie is not present.
Parameters:
getCursorPosition [line 1939]
number getCursorPosition(
string
$locator)
|
|
Retrieves the text cursor position in the given input element or textarea; beware, this may not work perfectly on all browsers.
Specifically, if the cursor/selection has been cleared by JavaScript, this command will tend to return the position of the last location of the cursor, even though the cursor is now gone from the page. This is filed as SEL-243.
This method will fail if the specified element isn't an input element or textarea, or there is no cursor in the element.
Parameters:
getElementHeight [line 1920]
number getElementHeight(
string
$locator)
|
|
Retrieves the height of an element
Parameters:
getElementIndex [line 1853]
number getElementIndex(
string
$locator)
|
|
Get the relative index of an element to its parent (starting from 0). The comment node and empty text node will be ignored.
Parameters:
getElementPositionLeft [line 1881]
number getElementPositionLeft(
string
$locator)
|
|
Retrieves the horizontal position of an element
Parameters:
getElementPositionTop [line 1894]
number getElementPositionTop(
string
$locator)
|
|
Retrieves the vertical position of an element
Parameters:
getElementWidth [line 1907]
number getElementWidth(
string
$locator)
|
|
Retrieves the width of an element
Parameters:
getEval [line 1395]
string getEval(
string
$script)
|
|
Gets the result of evaluating the specified JavaScript snippet. The snippet may have multiple lines, but only the result of the last line will be returned.
Note that, by default, the snippet will run in the context of the "selenium" object itself, so this
window
window.document.getElementById('foo')
If you need to use a locator to refer to a single element in your application page, you can use this.browserbot.findElement("id=foo")
Parameters:
getExpression [line 1957]
string getExpression(
string
$expression)
|
|
Returns the specified expression.
This is useful because of JavaScript preprocessing. It is used to generate commands like assertExpression and waitForExpression.
Parameters:
getHtmlSource [line 1825]
Returns the entire HTML source between the opening and closing "html" tags.
getLocation [line 1304]
Gets the absolute URL of the current page.
getMouseSpeed [line 1728]
Returns the number of pixels between "mousemove" events during dragAndDrop commands (default=10).
getPrompt [line 1292]
Retrieves the message of a JavaScript question prompt dialog generated during the previous action.
Successful handling of the prompt requires prior execution of the answerOnNextPrompt command. If a prompt is generated but you do not get/verify it, the next Selenium action will fail.
NOTE: under Selenium, JavaScript prompts will NOT pop up a visible dialog.
NOTE: Selenium does NOT support JavaScript prompts that are generated in a page's onload() event handler. In this case a visible dialog WILL be generated and Selenium will hang until someone manually clicks OK.
getSelectedId [line 1526]
string getSelectedId(
string
$selectLocator)
|
|
Gets option element ID for selected option in the specified select element.
Parameters:
getSelectedIds [line 1513]
array getSelectedIds(
string
$selectLocator)
|
|
Gets all option element IDs for selected options in the specified select or multi-select element.
Parameters:
getSelectedIndex [line 1500]
string getSelectedIndex(
string
$selectLocator)
|
|
Gets option index (option number, starting at 0) for selected option in the specified select element.
Parameters:
getSelectedIndexes [line 1487]
array getSelectedIndexes(
string
$selectLocator)
|
|
Gets all option indexes (option number, starting at 0) for selected options in the specified select or multi-select element.
Parameters:
getSelectedLabel [line 1448]
string getSelectedLabel(
string
$selectLocator)
|
|
Gets option label (visible text) for selected option in the specified select element.
Parameters:
getSelectedLabels [line 1435]
array getSelectedLabels(
string
$selectLocator)
|
|
Gets all option labels (visible text) for selected options in the specified select or multi-select element.
Parameters:
getSelectedValue [line 1474]
string getSelectedValue(
string
$selectLocator)
|
|
Gets option value (value attribute) for selected option in the specified select element.
Parameters:
getSelectedValues [line 1461]
array getSelectedValues(
string
$selectLocator)
|
|
Gets all option values (value attributes) for selected options in the specified select or multi-select element.
Parameters:
getSelectOptions [line 1552]
array getSelectOptions(
string
$selectLocator)
|
|
Gets all option labels in the specified select drop-down.
Parameters:
getSpeed [line 753]
Get execution speed (i.e., get the millisecond length of the delay following each selenium operation). By default, there is no such delay, i.e., the delay is 0 milliseconds.
See also setSpeed.
getTable [line 1422]
string getTable(
string
$tableCellAddress)
|
|
Gets the text from a cell of a table. The cellAddress syntax tableLocator.row.column, where row and column start at 0.
Parameters:
getText [line 1359]
string getText(
string
$locator)
|
|
Gets the text of an element. This works for any element that contains text. This command uses either the textContent (Mozilla-like browsers) or the innerText (IE-like browsers) of the element, which is the rendered text shown to the user.
Parameters:
getTitle [line 1316]
Gets the title of the current page.
getValue [line 1343]
string getValue(
string
$locator)
|
|
Gets the (whitespace-trimmed) value of an input field (or anything else with a value parameter).
For checkbox/radio elements, the value will be "on" or "off" depending on whether the element is checked or not.
Parameters:
getWhetherThisFrameMatchFrameExpression [line 1036]
boolean getWhetherThisFrameMatchFrameExpression(
string
$currentFrameString, string
$target)
|
|
Determine whether current/locator identify the frame containing this running code.
This is useful in proxy injection mode, where this code runs in every browser frame and window, and sometimes the selenium server needs to identify the "current" frame. In this case, when the test calls selectFrame, this routine is called for each frame to figure out which one has been selected. The selected frame will return true, while all others will return false.
Parameters:
getWhetherThisWindowMatchWindowExpression [line 1058]
boolean getWhetherThisWindowMatchWindowExpression(
string
$currentWindowString, string
$target)
|
|
Determine whether currentWindowString plus target identify the window containing this running code.
This is useful in proxy injection mode, where this code runs in every browser frame and window, and sometimes the selenium server needs to identify the "current" window. In this case, when the test calls selectWindow, this routine is called for each window to figure out which one has been selected. The selected window will return true, while all others will return false.
Parameters:
getXpathCount [line 1971]
number getXpathCount(
string
$xpath)
|
|
Returns the number of nodes that match the specified xpath, eg. "//table" would give the number of tables.
Parameters:
goBack [line 1130]
Simulates the user clicking the "back" button on their browser.
highlight [line 1371]
void highlight(
string
$locator)
|
|
Briefly changes the backgroundColor of the specified element yellow. Useful for debugging.
Parameters:
isAlertPresent [line 1171]
boolean isAlertPresent(
)
|
|
Has an alert occurred?
This function never throws an exception
isChecked [line 1408]
boolean isChecked(
string
$locator)
|
|
Gets whether a toggle-button (checkbox/radio) is checked. Fails if the specified element doesn't exist or isn't a toggle-button.
Parameters:
isConfirmationPresent [line 1207]
boolean isConfirmationPresent(
)
|
|
Has confirm() been called?
This function never throws an exception
isCookiePresent [line 2122]
boolean isCookiePresent(
string
$name)
|
|
Returns true if a cookie with the specified name is present, or false otherwise.
Parameters:
isEditable [line 1622]
boolean isEditable(
string
$locator)
|
|
Determines whether the specified input element is editable, ie hasn't been disabled.
This method will fail if the specified element isn't an input element.
Parameters:
isElementPresent [line 1591]
boolean isElementPresent(
string
$locator)
|
|
Verifies that the specified element is somewhere on the page.
Parameters:
isOrdered [line 1868]
boolean isOrdered(
string
$locator1, string
$locator2)
|
|
Check if these two elements have same parent and are ordered siblings in the DOM. Two same elements will not be considered ordered.
Parameters:
isPromptPresent [line 1189]
boolean isPromptPresent(
)
|
|
Has a prompt occurred?
This function never throws an exception
isSomethingSelected [line 1539]
boolean isSomethingSelected(
string
$selectLocator)
|
|
Determines whether some option in a drop-down menu is selected.
Parameters:
isTextPresent [line 1578]
boolean isTextPresent(
string
$pattern)
|
|
Verifies that the specified text pattern appears somewhere on the rendered page shown to the user.
Parameters:
isVisible [line 1608]
boolean isVisible(
string
$locator)
|
|
Determines if the specified element is visible. An
element can be rendered invisible by setting the CSS "visibility" property to "hidden", or the "display" property to "none", either for the element itself or one if its ancestors. This method will fail if the element is not present.
Parameters:
keyDown [line 564]
void keyDown(
string
$locator, string
$keySequence)
|
|
Simulates a user pressing a key (without releasing it yet).
Parameters:
keyDownNative [line 2306]
void keyDownNative(
string
$keycode)
|
|
Simulates a user pressing a key (without releasing it yet) by sending a native operating system keystroke.
This function uses the java.awt.Robot class to send a keystroke; this more accurately simulates typing a key on the keyboard. It does not honor settings from the shiftKeyDown, controlKeyDown, altKeyDown and metaKeyDown commands, and does not target any particular HTML element. To send a keystroke to a particular element, focus on the element first before running this command.
Parameters:
keyPress [line 463]
void keyPress(
string
$locator, string
$keySequence)
|
|
Simulates a user pressing and releasing a key.
Parameters:
keyPressNative [line 2338]
void keyPressNative(
string
$keycode)
|
|
Simulates a user pressing and releasing a key by sending a native operating system keystroke.
This function uses the java.awt.Robot class to send a keystroke; this more accurately simulates typing a key on the keyboard. It does not honor settings from the shiftKeyDown, controlKeyDown, altKeyDown and metaKeyDown commands, and does not target any particular HTML element. To send a keystroke to a particular element, focus on the element first before running this command.
Parameters:
keyUp [line 577]
void keyUp(
string
$locator, string
$keySequence)
|
|
Simulates a user releasing a key.
Parameters:
keyUpNative [line 2322]
void keyUpNative(
string
$keycode)
|
|
Simulates a user releasing a key by sending a native operating system keystroke.
This function uses the java.awt.Robot class to send a keystroke; this more accurately simulates typing a key on the keyboard. It does not honor settings from the shiftKeyDown, controlKeyDown, altKeyDown and metaKeyDown commands, and does not target any particular HTML element. To send a keystroke to a particular element, focus on the element first before running this command.
Parameters:
metaKeyDown [line 496]
Press the meta key and hold it down until doMetaUp() is called or a new page is loaded.
metaKeyUp [line 507]
mouseDown [line 614]
void mouseDown(
string
$locator)
|
|
Simulates a user pressing the mouse button (without releasing it yet) on the specified element.
Parameters:
mouseDownAt [line 628]
void mouseDownAt(
string
$locator, string
$coordString)
|
|
Simulates a user pressing the mouse button (without releasing it yet) at the specified location.
Parameters:
mouseMove [line 668]
void mouseMove(
string
$locator)
|
|
Simulates a user pressing the mouse button (without releasing it yet) on the specified element.
Parameters:
mouseMoveAt [line 682]
void mouseMoveAt(
string
$locator, string
$coordString)
|
|
Simulates a user pressing the mouse button (without releasing it yet) on the specified element.
Parameters:
mouseOut [line 601]
void mouseOut(
string
$locator)
|
|
Simulates a user moving the mouse pointer away from the specified element.
Parameters:
mouseOver [line 589]
void mouseOver(
string
$locator)
|
|
Simulates a user hovering a mouse over the specified element.
Parameters:
mouseUp [line 641]
void mouseUp(
string
$locator)
|
|
Simulates the event that occurs when the user releases the mouse button (i.e., stops holding the button down) on the specified element.
Parameters:
mouseUpAt [line 655]
void mouseUpAt(
string
$locator, string
$coordString)
|
|
Simulates the event that occurs when the user releases the mouse button (i.e., stops holding the button down) at the specified location.
Parameters:
open [line 928]
Opens an URL in the test frame. This accepts both relative and absolute URLs.
The "open" command waits for the page to load before proceeding, ie. the "AndWait" suffix is implicit.
Note: The URL must be on the same domain as the runner HTML due to security restrictions in the browser (Same Origin Policy). If you need to open an URL on another domain, use the Selenium Server to start a new browser session on that domain.
Parameters:
openWindow [line 949]
void openWindow(
string
$url, string
$windowID)
|
|
Opens a popup window (if a window with that ID isn't already open).
After opening the window, you'll need to select it using the selectWindow command.
<p>
This command can also be a useful workaround for bug SEL-339. In some cases, Selenium will be unable to intercept a call to window.open (if the call occurs during or before the "onLoad" event, for example). In those cases, you can force Selenium to notice the open window's name by using the Selenium openWindow command, using an empty (blank) url, like this: openWindow("", "myFunnyWindow"). </p>
Parameters:
refresh [line 1141]
Simulates the user clicking the "Refresh" button on their browser.
removeAllSelections [line 894]
void removeAllSelections(
string
$locator)
|
|
Unselects all of the selected options in a multi-select element.
Parameters:
removeSelection [line 882]
void removeSelection(
string
$locator, string
$optionLocator)
|
|
Remove a selection from the set of selected options in a multi-select element using an option locator.
Parameters:
runScript [line 2204]
void runScript(
string
$script)
|
|
Creates a new "script" tag in the body of the current test window, and
adds the specified text into the body of the command. Scripts run in this way can often be debugged more easily than scripts executed using Selenium's "getEval" command. Beware that JS exceptions thrown in these script tags aren't managed by Selenium, so you should probably wrap your script in try/catch blocks if there is any chance that the script will throw an exception.
Parameters:
select [line 852]
void select(
string
$selectLocator, string
$optionLocator)
|
|
Select an option from a drop-down using an option locator.
Option locators provide different ways of specifying options of an HTML Select element (e.g. for selecting a specific option, or for asserting that the selected option satisfies a specification). There are several forms of Select Option Locator.
- label=labelPattern:
matches options based on their labels, i.e. the visible text. (This
is the default.)
- value=valuePattern:
matches options based on their values.
- id=id:
matches options based on their ids.
- index=index:
matches an option based on its index (offset from zero).
If no option locator prefix is provided, the default behaviour is to match on
label.
Parameters:
selectFrame [line 1014]
void selectFrame(
string
$locator)
|
|
Selects a frame within the current window. (You may invoke this command multiple times to select nested frames.) To select the parent frame, use "relative=parent" as a locator; to select the top frame, use "relative=top".
You can also select a frame by its 0-based index number; select the first frame with "index=0", or the third frame with "index=2".
<p>
You may also use a DOM expression to identify the frame you want directly, like this: dom=frames["main"].frames["subframe"]
Parameters:
selectWindow [line 993]
void selectWindow(
string
$windowID)
|
|
Selects a popup window; once a popup window has been selected, all commands go to that window. To select the main window again, use null as the target.
Note that there is a big difference between a window's internal JavaScript "name" property and the "title" of a given window's document (which is normally what you actually see, as an end user, in the title bar of the window). The "name" is normally invisible to the end-user; it's the second parameter "windowName" passed to the JavaScript method window.open(url, windowName, windowFeatures, replaceFlag) (which selenium intercepts).
Selenium has several strategies for finding the window object referred to by the "windowID" parameter.
1.) if windowID is null, (or the string "null") then it is assumed the user is referring to the original window instantiated by the browser).
2.) if the value of the "windowID" parameter is a JavaScript variable name in the current application window, then it is assumed that this variable contains the return value from a call to the JavaScript window.open() method.
3.) Otherwise, selenium looks in a hash it maintains that maps string names to window "names".
4.) If that fails, we'll try looping over all of the known windows to try to find the appropriate "title". Since "title" is not necessarily unique, this may have unexpected behavior.
If you're having trouble figuring out what is the name of a window that you want to manipulate, look at the selenium log messages which identify the names of windows created via window.open (and therefore intercepted by selenium). You will see messages like the following for each window as it is opened:
debug: window.
open call intercepted; window ID
(which you can use with
selectWindow()) is
"myNewWindow"
In some cases, Selenium will be unable to intercept a call to window.open (if the call occurs during or before the "onLoad" event, for example). (This is bug SEL-339.) In those cases, you can force Selenium to notice the open window's name by using the Selenium openWindow command, using an empty (blank) url, like this: openWindow("", "myFunnyWindow").
Parameters:
setBrowserLogLevel [line 2186]
void setBrowserLogLevel(
string
$logLevel)
|
|
Sets the threshold for browser-side logging messages; log messages beneath this threshold will be discarded.
Valid logLevel strings are: "debug", "info", "warn", "error" or "off". To see the browser logs, you need to either show the log window in GUI mode, or enable browser-side logging in Selenium RC.
Parameters:
setContext [line 2251]
void setContext(
string
$context)
|
|
Writes a message to the status bar and adds a note to the browser-side log.
Parameters:
setCursorPosition [line 1839]
void setCursorPosition(
string
$locator, string
$position)
|
|
Moves the text cursor to the specified position in the given input element or textarea.
This method will fail if the specified element isn't an input element or textarea.
Parameters:
setMouseSpeed [line 1716]
void setMouseSpeed(
string
$pixels)
|
|
Configure the number of pixels between "mousemove" events during dragAndDrop commands (default=10).
Setting this value to 0 means that we'll send a "mousemove" event to every single pixel in between the start location and the end location; that can be very slow, and may cause some browsers to force the JavaScript to timeout.
If the mouse speed is greater than the distance between the two dragged objects, we'll just send one "mousemove" at the start location and then one final one at the end location.
Parameters:
setSpeed [line 739]
void setSpeed(
string
$value)
|
|
Set execution speed (i.e., set the millisecond length of a delay which will follow each selenium operation). By default, there is no such delay, i.e., the delay is 0 milliseconds.
Parameters:
setTimeout [line 2042]
void setTimeout(
string
$timeout)
|
|
Specifies the amount of time that Selenium will wait for actions to complete.
Actions that require waiting include "open" and the "waitFor*" actions.
The default timeout is 30 seconds.
Parameters:
shiftKeyDown [line 474]
Press the shift key and hold it down until doShiftUp() is called or a new page is loaded.
shiftKeyUp [line 485]
shutDownSeleniumServer [line 2290]
void shutDownSeleniumServer(
)
|
|
Kills the running Selenium Server and all browser sessions. After you run this command, you will no longer be able to send commands to the server; you can't remotely start the server once it has been stopped. Normally you should prefer to run the "stop" command, which terminates the current browser session, rather than shutting down the entire server.
start [line 329]
Run the browser and set session id.
stop [line 341]
Close the browser and set session id null
submit [line 907]
void submit(
string
$formLocator)
|
|
Submit the specified form. This is particularly useful for forms without submit buttons, e.g. single-input "Search" forms.
Parameters:
type [line 700]
void type(
string
$locator, string
$value)
|
|
Sets the value of an input field, as though you typed it in.
Can also be used to set the value of combo boxes, check boxes, etc. In these cases, value should be the value of the option selected, not the visible text.
Parameters:
typeKeys [line 726]
void typeKeys(
string
$locator, string
$value)
|
|
Simulates keystroke events on the specified element, as though you typed the value key-by-key.
This is a convenience method for calling keyDown, keyUp, keyPress for every character in the specified string; this is useful for dynamic UI widgets (like auto-completing combo boxes) that require explicit key events.
Unlike the simple "type" command, which forces the specified value into the page directly, this command may or may not have any visible effect, even in cases where typing keys would normally have a visible effect. For example, if you use "typeKeys" on a form element, you may or may not see the results of what you typed in the field.
In some cases, you may need to use the simple "type" command to set the value of the field and then the "typeKeys" command to send the keystroke events corresponding to what you just typed.
Parameters:
uncheck [line 777]
void uncheck(
string
$locator)
|
|
Uncheck a toggle-button (checkbox/radio)
Parameters:
waitForCondition [line 2025]
void waitForCondition(
string
$script, string
$timeout)
|
|
Runs the specified JavaScript snippet repeatedly until it evaluates to "true".
The snippet may have multiple lines, but only the result of the last line will be considered.
<p>
Note that, by default, the snippet will be run in the runner's test window, not in the window of your application. To get the window of your application, you can use the JavaScript snippet selenium.browserbot.getCurrentWindow()
Parameters:
waitForFrameToLoad [line 2084]
void waitForFrameToLoad(
string
$frameAddress, string
$timeout)
|
|
Waits for a new frame to load.
Selenium constantly keeps track of new pages and frames loading, and sets a "newPageLoaded" flag when it first notices a page load.
See waitForPageToLoad for more information.
Parameters:
waitForPageToLoad [line 2064]
void waitForPageToLoad(
string
$timeout)
|
|
Waits for a new page to load.
You can use this command instead of the "AndWait" suffixes, "clickAndWait", "selectAndWait", "typeAndWait" etc. (which are only available in the JS API).
Selenium constantly keeps track of new pages loading, and sets a "newPageLoaded" flag when it first notices a page load. Running any other Selenium command after turns the flag to false. Hence, if you want to wait for a page to load, you must wait immediately after a Selenium command that caused a page-load.
Parameters:
waitForPopUp [line 1071]
void waitForPopUp(
string
$windowID, string
$timeout)
|
|
Waits for a popup window to appear and load up.
Parameters:
windowFocus [line 1765]
Gives focus to the currently selected window
windowMaximize [line 1776]
Resize currently selected window to take up the entire screen
